SquareTrade © AP6.0
NEW DURA-SLIDE 1" STROKE PNEUMATIC AIR SLIDE AIR-20
This is a Brand New Pneumatic Dura-Slide II Air Slide, Type AIR-20.
This Slide has 1 Inch of Stroke, guide pins measure 1/2" diameter, center pin 1/4' and the slide measures 9 1/4" long overall length.
The slide measures 3"" wide x 3 1/2" long x 1 1/4" High. Included are cushioning pads on both sides.
DURA-SLIDE AIR Series of Pneumatic Linear Positioning Devices provide a practical, low-cost
approach to automatic work positioning. The built-in air cylinder simplifies slide operation and
eliminates the need for complex, expensive activating mechanisms. The unit is extremely compact
requiring only minimal space for installation. The AIR Series is field proven with up to 160
million inches accumulated travel with negligible wear.
DURA-SLIDE AIR Series maintains all rod bores parallel to the mounting surface within .002"
per foot. The four slide bearings are oil impregnated bronze bushings, which eliminate the
need for re-lubrication. Bronze bushings are utilized rather than linear ball bearings because
bushings distribute the load over a larger surface area. This results in less wear on the slide
rods. Both rods are pinned to the end blocks to assure positive location. Delrin bumper pads,
located at each end of the stroke, contribute to a low noise level minimizing the clatter inherent
in fast acting slide devices.
DURA-SLIDE AIR units can be mounted in any plane provided both end blocks are set on
machined surfaces to prevent distortion. Either the main body or the end blocks function as
the fixed supports. The center main body houses the air cylinder and is offset from the end
blocks in two planes. This offset feature allows the end blocks to be mounted on the same
plane surface without risers. Multiple mounting holes in all the sections provide mounting
versatility. For example: with the use of a transition plate two center body sections can be
joined at right angles to construct a cross-yoke or an inexpensive pick-and-place unit.
BORE DIA - 0.750” [19.1mm]

ROD DIA - 0.500” [12.70mm]

STROKE - 1"
For more Information see:

http://www.rimfg.com/catalog/DURA-SLIDE%20Air%20Slides_r2.pdf
Many other sizes available, see my other auctions.
I will fully guarantee this great item.
Shipping in the Continental US is $9.90 -- I have very competitive rates for our always welcomed International bidders.
Pay me securely with your Visa or MasterCard through PayPal!
Powered by eBay Blackthorne 04.07.018