UP TO 2 NEW PACIFIC 1/2" ID OPEN SIMPLICITY PRECISION PILLOW BLOCKS PN08
This is for up to 2 Brand New in the Box, Pacific Precision Linear Simplicity 1/2" ID Open Bearing Pillow Blocks, No. PNO8.
Each Bid is Block.

Static Load Capacity (Pounds): 1950 LBS

Inside Diameter (Inch): 1/2

Pbc Linear Pillow Block (0.500 Inch Bore) 1.500 Inch L. Model: PN08. More details: Linear Pillow Block Bearing, Open, Bore Dia 0.500 In, Overall Width 2.000 In, Overall Length 1.500 In, Overall Height 1.125 In, Body Width 1.375 In, Flange Thickness 0.250 In, Mounting Surface To Shaft Center 0.688 In, Mounting Hole Dia 5/32 In, #6 Bolt Size, Slot Width 0.313 In, Slot Angle 60 Degrees, Dynamic Load Capacity 1950 Lb, Static Load Capacity 1950 Lb, For Use With Support And Feather Rails
The Pacific Linear Bearings are made from 6061-T6 and is heat treated and artificially aged aluminum with good strength and corrosion resistance and Anodized with a sulfuric bath anodizing with a nickel acetate seal that will stand up to 14 days exposure in a 5% salt spray solution at 96°F.
All bearings are precision ground both I.D. and O.D. to provide the highest quality.

These bearings can carry from 4 to 20 times the load of a linear ball bearing.

STRENGTHS:

Embeddability of hard particulate eliminating seals in most applications

High load capacity
Self-lubricating - runs with or without added lubrication will also allow the frictional heat to dissipate through the bearing shell
Will not rust or corrode due to the anodized aluminum shell
Highly accurate - all critical OD and ID surfaces are precision ground on bearing grinders.
The liner is bonded to the bearing shell at the molecular level transferring the load throughout the bearing
Smooth running, vibration dampening, no metal-to-metal contact or shaft galling
WILL NOT CATASTROPHICALLY FAIL
bearings stand up to harsh and dirty environments i.e. grease, saw dust.

bearings will provide excellent performance in a submerged condition. The bearings will employ the fluid as a lubricant showing increased velocities and wear life. Oils and non-salt water are especially effective.

Due to self-lubrication, low outgassing, and a minimum of particulate (buildup), Simplicity bearings are excellent in clean rooms and vacuums.
I will fully guarantee this bearing.
Shipping in the Continental US is $5.90 - I have very competitive rates for our always welcomed International bidders.
Thanks for looking! If you have any question on this item please call us at 1-800-826-3433 (9 - 5pm Eastern).
Pay me securely with your Visa or MasterCard through PayPal!
Powered by eBay Blackthorne 04.14.062