Lot of 10 New Iscar VNMG 331-NF IC907 Carbide Coated Turning inserts 0

Lot of 10 New Iscar VNMG 331-NF IC907 Carbide Coated Turning inserts 05505285

$ 79⁰⁰

Condition: New

This is an Auction for Lot of 10 New Iscar 05505285 TiAlN Coated Carbide Turning inserts, Catalog # VNMG 331-NF IC907.

Each bid is for 10 inserts.

TiAlN Finish, 16.60 mm Long, 35 deg V - Diamond (Rhombic) 35-Deg, Series Isoturn

Specifications

Insert Style: VNMG ISO Size Code: 160404

ANSI Size Code: 331 Insert Shape: V - Diamond (Rhombic) 35-Deg

Included Angle: 35 Inscribed Circle (Decimal Inch): 0.3748

Inscribed Circle (Inch): 3/8 Corner Radius (Inch): 1/64

Corner Radius (Decimal Inch): 0.0157 Insert Material: Carbide

Manufacturer Grade: IC907 Coating/Finish: TiAlN

Relief Angle: 0 Insert Thickness (Decimal Inch): 0.1874

Insert Thickness (Inch): 3/16 Series: Isoturn

Grade Characteristics: Cast Iron (K) - High Wear-Resistance; Aluminum & Non-Ferrous (N) - High Wear-Resistance to Moderate Wear-Resistance and Toughness; Stainless Steel (M) - High Wear-Resistance to Moderate Wear-Resistance and Toughness; Special, Super Alloys (S) - High Wear-Resistance to Moderate Wear-Resistance and Toughness; Steel (P) - High Wear-Resistance to Moderate Wear-Resistance and Toughness Chip Breaker Operation: Finishing

Side Clearance: Negative Insert Shape Code: V

Hole Diameter (Decimal Inch): 0.1500 Maximum Depth of Cut (Decimal Inch): 0.0980

ISO Insert Code: VNMG160404 ANSI Insert Code: VNMG331

Insert Holding Method: Pin; Clamp Clearance Code: N

Tolerance Code: M Coating Process: PVD

Length Range (Decimal Inch): 0.6500 - 0.7000 Rake: Positive

Insert Length (Decimal Inch): 0.6535 Insert Length (mm): 16.60

Primary Workpiece Material Code: P; S; K; M; N Iso Code: ISO 13399

Standards: ISO 13399 Material Grade: C7; C8

Chip Breaker: NF UNSPSC Code: 23242105

Insert Size Code: 331

I will fully guarantee these inserts.
We have lots of quality inserts available - see my other auctions.
Shipping in the Continental US is free- I have very competitive rates for our always welcomed International bidders.

We Also Recommend

Kennametal B052A09000CP 9 mm (0.3543") Carbide Drill Coolant Thru 10MM SHK

$ 69⁹⁰

Sold Out

Niagara 46430 Carbide 6MM Diameter 6MM Shank 4 Flute AlTiN coated End Mill

$ 17⁹⁰

Niagara Cutter 76134 Carbide 3/8" 4 Fl Fine Pitch Roughing End Mill

$ 39⁹⁰

Niagara 68672 Carbide 6MM Diameter 6MM Shank 4 Flute AlTiN coat End Mill

$ 17⁹⁰

Valenite VSD687-075-275 11/16" .687" Carbide Tip Drill Coolant Thru 3/4" SHK

$ 59⁹⁰

Insert Style: VNMG	ISO Size Code: 160404
ANSI Size Code: 331	Insert Shape: V - Diamond (Rhombic) 35-Deg
Included Angle: 35	Inscribed Circle (Decimal Inch): 0.3748
Inscribed Circle (Inch): 3/8	Corner Radius (Inch): 1/64
Corner Radius (Decimal Inch): 0.0157	Insert Material: Carbide
Manufacturer Grade: IC907	Coating/Finish: TiAlN
Relief Angle: 0	Insert Thickness (Decimal Inch): 0.1874
Insert Thickness (Inch): 3/16	Series: Isoturn
Grade Characteristics: Cast Iron (K) - High Wear-Resistance; Aluminum & Non-Ferrous (N) - High Wear-Resistance to Moderate Wear-Resistance and Toughness; Stainless Steel (M) - High Wear-Resistance to Moderate Wear-Resistance and Toughness; Special, Super Alloys (S) - High Wear-Resistance to Moderate Wear-Resistance and Toughness; Steel (P) - High Wear-Resistance to Moderate Wear-Resistance and Toughness	Chip Breaker Operation: Finishing
Side Clearance: Negative	Insert Shape Code: V
Hole Diameter (Decimal Inch): 0.1500	Maximum Depth of Cut (Decimal Inch): 0.0980
ISO Insert Code: VNMG160404	ANSI Insert Code: VNMG331
Insert Holding Method: Pin; Clamp	Clearance Code: N
Tolerance Code: M	Coating Process: PVD
Length Range (Decimal Inch): 0.6500 - 0.7000	Rake: Positive
Insert Length (Decimal Inch): 0.6535	Insert Length (mm): 16.60
Primary Workpiece Material Code: P; S; K; M; N	Iso Code: ISO 13399
Standards: ISO 13399	Material Grade: C7; C8
Chip Breaker: NF	UNSPSC Code: 23242105
Insert Size Code: 331