Lot of 9 New Iscar Carbide groove & turning inserts GIF 8.00-1.20 IC83

Lot of 9 New Iscar Carbide groove & turning inserts GIF 8.00-1.20 IC830

$ 139⁰⁰

This is an Auction for Lot of 9 New Iscar Carbide double end groove turn and parting Tin Coated inserts, Catalog # GIF 8.00-1.20 IC830.

Each bid is for 9 inserts.

Cutting Width (CW) 0.315? Cutting Edge Material Carbide

Corner Radius (RE) 0.047? Application | Ext. Grooving | Ext. Grooving & Turning | Face Grooving | Face Grooving & Turning | Face Grooving Along Shaft | Groove Turn & Parting Inserts | Int. Groove & Turn | Int. Grooving |

Cutting Depth Maximum (CDX) 1.063? Applicable Material | Steel | Stainless Steel | Hi Temp Alloys |

Clearance Angle Major (AN) 7 Degrees Chip Breaker Type FT

Insert Length (INSL) 1.181? Cutting Position External

Minimum Bore Diameter (DMIN) 2.559? Axial Groove Outside Diameter Minimum (DAXN) 3.15?

Feed 0.0244 inch/rev Measurement Type Inch

Coating AlTiN+TiN Tool Type Groove-Turn Precision Inserts

Grade IC830 Body Material Carbide

Shape 90° Rectangular

I will fully guarantee these inserts.

We have lots of quality inserts available - see my other auctions.
Shipping in the Continental US is free- I have very competitive rates for our always welcomed International bidders.

We Also Recommend

Kennametal B052A09000CP 9 mm (0.3543") Carbide Drill Coolant Thru 10MM SHK

$ 69⁹⁰

Niagara 46430 Carbide 6MM Diameter 6MM Shank 4 Flute AlTiN coated End Mill

$ 17⁹⁰

Niagara Cutter 76134 Carbide 3/8" 4 Fl Fine Pitch Roughing End Mill

$ 39⁹⁰

Niagara 68672 Carbide 6MM Diameter 6MM Shank 4 Flute AlTiN coat End Mill

$ 17⁹⁰

Valenite VSD687-075-275 11/16" .687" Carbide Tip Drill Coolant Thru 3/4" SHK

$ 59⁹⁰

Cutting Width (CW)	0.315?	Cutting Edge Material	Carbide
Corner Radius (RE)	0.047?	Application	\| Ext. Grooving \| Ext. Grooving & Turning \| Face Grooving \| Face Grooving & Turning \| Face Grooving Along Shaft \| Groove Turn & Parting Inserts \| Int. Groove & Turn \| Int. Grooving \|
Cutting Depth Maximum (CDX)	1.063?	Applicable Material	\| Steel \| Stainless Steel \| Hi Temp Alloys \|
Clearance Angle Major (AN)	7 Degrees	Chip Breaker Type	FT
Insert Length (INSL)	1.181?	Cutting Position	External
Minimum Bore Diameter (DMIN)	2.559?	Axial Groove Outside Diameter Minimum (DAXN)	3.15?
Feed	0.0244 inch/rev	Measurement Type	Inch
Coating	AlTiN+TiN	Tool Type	Groove-Turn Precision Inserts
Grade	IC830	Body Material	Carbide
Shape	90° Rectangular